Crown Trade Matt is a water-based flat matt interior decorative finish for walls and ceilings with excellent opacity and colour retention.
Is a premium matt emulsion for interior use on walls and ceilings, where a flat non-reflective finish is required.
Mix well before use. Apply by brush or medium roller. For airless spraying (thinning may be necessary). For more information contact Crown Trade's customer relations team.
Always mix packs to ensure colour consistency.
Please check colour accuracy before application.
Crown Paints is not responsible for any decorating costs resulting from the application of an incorrect colour.
All surfaces must be clean, dry and free of anything that may affect the adhesion of the materials to be applied. Powdery surfaces must be primed with a coat of Sandtex Trade Water Based Stabilising Solution.
Polished or dense surfaces
Polished or dense surfaces should be primed with Crown Trade Alkali Resisting Sealer or, if a water-based alternative is required, Crown Trade Grip Extreme Sealer.
A water-based alternative, Crown Trade Grip Extreme. Porous surfaces must be coated with a
Porous surfaces should be coated with a layer of Crown Trade Matt Vinyl diluted with 40% clean water by volume.
volume. If clean water is not available, apply a coat of Crown Trade Covermatt
Drywall Primer. Any areas of surface fill after priming must be touched up with the primer or filler.
Any filler areas of the surface after priming should be touched up with the thinned primer or fog as for the main areas.
Previously Decorated Surfaces All surfaces must be sound, clean, sufficiently dry and free of anything that would interfere with the adhesion of the materials to the surface.
Remove any dirt, grease, etc., that may interfere with the adhesion of the materials to be applied. Remove all loose paint,
Remove any loose, flaking or suspect paint. Remove the edges of sound paint. Organic growth should be and areas treated with Crown Trade's fungicide solution. Fill all fixing holes, cracks and fill all fixing holes, cracks and surface defects with Sandtex Trade ready-to-use filler.
Prime bare, filled and powdered areas as for new surfaces above. Wash off any remaining sound paint with hot water and a liquid detergent solution to remove all contaminants.
Wash with hot water and a liquid detergent solution to remove all contaminants, changing the water frequently. Any shiny or eggshell surfaces should be cleaned.
Shiny or eggshell surfaces should be abraded with water to provide a key. Rinse with clean water to remove all residues. Allow to dry. If, after cleaning, some areas are still contaminated with substances that may cause staining and/or bleeding, apply a coat of Crown Trade primer.
If any areas are still contaminated with stains and/or bleeding, apply a coat of Crown Trade PSB Stain Block, Primer.